1200 Watt peak PMA PC 24 VOLT DC Wind Turbine Permanent Magnet Generator

Description

You are bidding on a power-core
DC PMA
optimized for charging
24 volt batteries
via wind power.
Needs fast style blades called HORNET blades 28"
10 to 11 blades is best.
Model 'n' with corrosion proofed inside.
Thermodyne 1600W Wind Turbine Review
Video will open in a new window
Using the iPhone app? Copy this link into Safari:
TREX blades on SC12 PMA Wind Turbine windgeneering
Video will open in a new window
Using the iPhone app? Copy this link into Safari:
What's better, AC or DC wind turbine PMA's / PMG's
Video will open in a new window
Using the iPhone app? Copy this link into Safari:
Thermodnye Hornet Wind Farm
Video will open in a new window
Using the iPhone app? Copy this link into Safari:
CLICK HERE TO SEE VIDEO #1
CLICK HERE TO SEE VIDEO #2
CLICK HERE TO SEE VIDEO  #3
This auction is for a MAXIUM-CORE (PC) __VADC PMA designed for use
with our 28" Hornet or our 34.64" KT propeller (blades)  and with these
blades can make up to 1000 Watts peak power in high winds (Rated as peak)
All voltage ranges (VR) are based on use for battery charging with wind power!
This PMA's is recommended for wind turbines only! Peak at about 2000 RPM.
For PMA's / PMG's  for engines / hydro use our line of #PC1212 or #QC1212 models.
SEE POWER CHART BELOW FOR ALL V.R. MODELS
1200 Watts peak
/ See peak volts for all models below*. Make sure your equipment can handle these peaks. Designed to operate in an area with low/medium speed averages of 4.4 to 5.8 m/s and greater (Zone 2.1-4.2) Provides 137 kWh per month (1578 kWh year)  4.21 kWh per day in a 14.1 mph (6.1 m/s) average wind speed. In a zone 7 area this turbine can make up to 200% more power or 12.2 kWh.
Wind Zones are defined by m/
Wind Zone 1      0 – 4.4 m/s
Wind Zone 2    4.4 – 5.1 m/s
Wind Zone 3    5.1 – 5.6 m/s
Wind Zone 4    5.6 – 6.0 m/s
Wind Zone 5    6.0 – 6.4 m/s
Wind Zone 6    6.4 – 7.0 m/s
Wind Zone 7    7.0 – 9.4 m/s  (20-22 mph)
*Peaks for V.R.'s
You will receive only the most modern magnet
core with deep saturation slotted magnets
providing deep reaching pole power into
the stator  coil for maximum amperage
#1 -SEE VIDEO OFF HOW GREAT IT WORKS.  CLICK HERE!
#2- SEE VIDEO ON HOW TO USE IT. CLICK
#3 - CLICK HERE FOR VIDEO TO SEE HOW IT WORKS. CLICK HERE!
#4 - Learn now SEE video. CLICK HERE!
#5 - SEE AC/DC VIDEO - LEARN HERE. CLICK NOW!
Includes a real ori
ginal
MAXIUM-CORE PMA -
There are plenty of "Look-A-Like" PMA's on the market that cost less.
The reason why they cost less
is that they are utilizing an old fashioned
The modern type PLATE AND GROOVE rotor that we have developed is the most celebrated and also the
most copied type which we pioneered.  The important part is that
PLATE AND GROOVE makes power at
MUCH LOWER RPM's than the older and traditional Clam type rotor designs that do not provide deep
magnetic saturation of the Stator coil offering 600% more power in low RPM scenarios over
Clam type designs
In small wind turbines this is VERY important to make
your power in the
LOWER RPM ranges.
Spend a little more and get a LOT more  BANG-FOR-YOUR-BUCK!!!  Money well spent!
From the beginning GM designed the Delco to run
WET and even tested them to operate
Under Water
!
Designing an alternator that can survive at 375 degrees F. under the hood of a car operating with rain water coming through the
radiator and from water puddles is
No Easy Task!
Over 100,000,000 10/12si's were produced by Delco and after-market vendors!
Parts for this legendary 'work-horse' will be available for the next 50+ years.  World's most supported and well recognized model!
"NOT ALL PMA's ARE CREATED EQUAL"
We make our own brand new
ROTOR POLE
SHOES
AND
STATOR CORES
!!!